Information
- Track Size:36-inch
- PTO:Yes
- Transmission:Power Shift
- Guidance-ready:Yes
- Guidance Receiver:Yes
- Guidance Display:Yes
- Hydraulic Pump:Big
Highlights
- $526,900.00
- Killam
- Pre-Owned
- C019035
- 2017
- Case IH
- Steiger 580 Quadtrac
- ZHF311768
- 12.9 L, Two-Stage Turbo
- 580
- 2905
- Axle Output End: Flange | Drawbar: Category 4
- 16F x 2R Full Powershift | Speeds: 16F / 2R
- Available
Specifications
- 2017
- Case IH
- Steiger 580 Quadtrac
- Base
- 4WD
- 12.9 L, Two-Stage Turbo
- Case IH FPT
- Advertised: 580 HP (433 kW) | Maximum: 638 HP (476 kW) | Power Boost: 58 HP (43 kW)
- 2100 rpm
- Two-Stage Turbocharged, Inter- & Aftercooled
- Hydraulic fan drive
- Tier 4B / Final | Cleanup Catalyst (CUC): standard | Diesel Oxidation Catalyst (DOC): standard
- Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF): SCR w/ DEF | Exhaust Pipe: Vertical stack
- Quantity: 6
- 787 in³ (12.9 L)
- 5.31 in (135 mm)
- 5.91 in (150 mm)
- 16F x 2R Full Powershift | Speeds: 16F / 2R
- Independent
- 1000 rpm
- Planetary & Planetary Drop Gear
- Configuration: Frame Articulated
- High Pressure Common Rail | Control: Electronic
- Direct
- Service: Wet disc
- 30 or 36 (762 or 914) Rubber Track
- 30 or 36 (762 or 914) Rubber Track
- 4 Tracks
- Rated: 240 Amps
- System Rating: 12 V System; 24 V Start
- 25 mph (40 kph)
- Pressure Flow Compensated | Standard Remote Valves Quantity: 4 std
- Single pump std
- Implement Pump: 42 gpm (159 lpm)
- Axle Output End: Flange | Drawbar: Category 4
- 3-Point Hitch Category: Category 4N Quick Coupler | Draft Link Ends Telescopic: Quick Coupler
- 118 to 124 in 2997 to 3150 mm)
- No bar axle
- 154 in (3912 mm)
- 470 gal (1779 L)
- 24 in behind pin: 19,728 lbs (8949 kg)
- DEF: 85 gal (322 L)
- Total allowable, w/maximum ballast: 64,000 lbs (29030 kg)
- 48,780 lbs (22126 Kg)
- Block Design, Replaceable Liners: Wet liners | Shuttle (Forward-Reverse): Yes
- 3-Point Hitch: Three Position, Lift, Hold, Lower
